PolySat 9" x 11" polypropylene wipers pre-wetted with 70% IPA 50 wipers/flexpack 24 flexpacks/case =

PolySat® Pre-wetted Cleanroom Wipers

PolySat^® TX1051 pre-wetted cleanroom wipers are made from 100% melt-blown polypropylene with a cut edge, creating a soft wiper ideal for use on sensitive surfaces. TX1051 is pre-wetted with 0.2 µm filtered 70% IPA / 30% DIW for ease of use. The wipes provide a consistent, optimized cleaning efficiency with repeatable wetness and VOC levels. TX1051 PolySat^® wipers are packaged in easy-to-use, peel-and-reseal bags, reducing solution evaporation that preserves the consistent wiper wetness level.

• Non Sterile
• 0.2 micron filtred
• 70% IPA / 30% DIW for ease of use
• 100% melt-blown polypropylene with a cut edge
• ISO Class 5 - 8, Class 100 - 100,000, EU Grade B - D
• Manufactured to provide low levels of particles and extractables creating a wiper suitable for general cleaning and wiping
• Designed for use on abrasive surfaces.
  • This wiper will not easily snag or abrade releasing particles and fibers into the process or environment.
• Meets USP <797> and USP <800> wiper requirements
• Wiping and cleaning surfaces, equipment and parts.
• Removing lubricants, adhesives and other solutions and processing aids.
• Cleaning gloves, notebooks, phones or any other item entering the cleanroom.
• 50 wipers per flexpack
• 24 flexpacks (1,200 wipers) per case